 |
 |
This Turboemulsifier includes counter-rotating sweep blades and a homogenizer mounted in the bottom center of the vessel. Unit is designed for vacuum/pressure operation.
|
Our Versamix is normally supplied with three seperate agitators including an anchor, high speed disperser and a rotor-stator homogenizer. The unit shown is supplied with a special helical anchor design and is ideal for higher viscosity food mixng needs
|
 |
 |
The 10 gallon VersaMix is ideal for pilot plant operation in a food manufacturing plant. The 10 gallon model VMC VersaMix is shown with all stainless steel construction, and a complete seperate control system. The mixer is raised to permit direct discharge into containers.
|
Model VMC 100 is provided with a standard three wing anchor, high speed disperser and a rotor-stator homogenizer. A special SLIM (solid, liquid introduction manifold) is also provided. Stainless components are polished to a 320 grit finish.
|
 |
 |
This 15 gallon VersaMix was supplied with a special conical bottom to insure that all mixed materials will drain after the mix cycle is completed. Scrapers are provided on the anchor to maximize heat transfer from the jacketed vessel walls.
|
A 40 gallon model VMC, triple shaft mixer with the vessel elevated and mounted on non-sparking caster wheels, to allow easy movement of the vessel within the process plant. Unit is designed for full vacuum operation.
|
